Wishing: One tested 6A7 tube. 4 wood knobs with setscrews. One 4 mfd 25+ V.

[westcoastjohn]

Looking to buy a 6A7 pentagrid converter. It’s a front end tube with a UX6 base, 6 pins plus a grid cap. Maybe you have one in a parked chassis?
It must test good or at least be proven working.

Knobs
1) Wanting a set of 3 or 4 knobs, 1935 CGE 1 3/8 ” diameters.(I have one such knob, 1935 CGE-type, wooden knob),

or a matching set of 4 wood knobs with setscrews,
or Two pairs of wood knobs that look good as a set.

2) One 1953 Crosley E-15 metal knob with or without the plastic insert.

3) Need a 4.0 or 4.7 mfd Electrolytic cap rated for at least 25 and not more than 160 volts.

• This topic was modified 3 hours, 1 minute ago by westcoastjohn.
• This topic was modified 2 hours, 1 minute ago by westcoastjohn.

Attachments:

1. 

   CGE-knobs-1.jpg
   

2. 

   4-knobs-1.jpg
   

[westcoastjohn]

Crosley E-15. Ask about this one, or sell me a knob for the other one. :>)

• This reply was modified 2 hours, 46 minutes ago by westcoastjohn.

Attachments:

1. 

   Brownie-new1.jpg
   

[Author]

Posts