Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • #16594
    Darren
    CVRS Member

    Due to the design of where the speaker meets the chassis, someone who last worked on this set had not used a rubber washer and driven the screw through the speaker pot assembly and into the field coil rendering the field coil inoperative. Therefore I am looking for a good working speaker (with field coil and pot assembly) for this model.
    The Speaker is a 5″ Diameter as per schematic shows Philco part P-19, (36=1101)
    I will also need the Output transformer (Philco part 32-7041) as the secondary of mine measures zero resistance.

    #16666
    Darren
    CVRS Member

    Found! Thanks!

Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.