Home › Forums › Electronics Restoration › Value of volume control on a Rogers 10-85
- This topic has 7 replies, 4 voices, and was last updated 6 years ago by
Jean Marcotte.
-
AuthorPosts
-
September 16, 2019 at 8:29 pm #12033
Dan Walker
CVRS MemberI am going to get started on recapping a Rogers Frontenac model 10-85.
I do have the RCC book , but it only gives me the schematic, and there is no information about the values of the capacitors and volume control.
I would like to know what voltages that the electrolytic caps are also
Thanks
Dan in CalgarySeptember 17, 2019 at 1:25 am #12037Sterling Spurrell
Forum ParticipantHi Dan will this help.
https://elektrotanya.com/rogers_ten_10_85_86_export_23_chassis_radio_sm.pdf/download.html
September 17, 2019 at 5:04 am #12038Alistair Thomson
Forum ParticipantNice one, Sterling. Has all the info Dan needs.
September 17, 2019 at 7:23 am #12039Dan Walker
CVRS MemberThank you Sterling . That is exactly the information I need.
Much appreciated.
Dan in CalgarySeptember 17, 2019 at 9:35 am #12040Sterling Spurrell
Forum ParticipantNo problem glad to help.
September 23, 2019 at 8:01 pm #12045Dan Walker
CVRS MemberWith the help of Sterling’s parts list, I have this radio all straightened out. At lease it works very well now.
The volume control was attached to the power input [I don’t know why], and there were a few other things all messed up.
the 24 volt tuning bulb works [after I put in a bulb].
The cabinet will get done next spring.Here are some photos
Dan in CalgaryMay 20, 2020 at 4:29 pm #14425Dan Walker
CVRS MemberWell I finally got to the cabinet. So far it is stripped and stained.
The legs were not attached very well so I took them off to male it easier to strip and stain.
I had to put on a new top, and it was hard to find matched veneer, but I found some.
The grill cloth was in bad shape ,so it will get new cloth
Here is what it looks like so far.
Dan in Calgary.May 21, 2020 at 8:46 pm #14465Jean Marcotte
CVRS MemberWow! The legs I need for my De Forest-Crosley Duchess.
Attachments:
-
AuthorPosts
- You must be logged in to reply to this topic.












