Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
  • #13519
    Dan Walker
    CVRS Member

    I bought this rogers 10-85 last fall , and I finally found some matched veneer to do the top.
    I removed what was left of the old top by heating it with an iron and using a putty knife.
    I placed a piece of cloth between the iron and the top, so the heated lacquer would not stick to the iron.
    After I sanded the top I taped off the areas,and applied tite bond glue to the veneer and the cabinet with a small roller.
    After letting it dry I placed the veneer in place and ironed it on.
    There were a couple of places where the veneer split and I had to put on a thin patch of new veneer.
    All in All it turned out quite well.
    Now it is ready for the stripping of the cabinet. and refinishing.
    Dan in Calgary

    Les Dickson
    CVRS Member

    Beautiful job Dan. Thanks for sharing.

    CVRS Member

    Very nice! hope to develop those skills one day.

    Sterling Spurrell
    CVRS Member

    Hi Dan great work. Also I sent you a email about a zenith radio part and was wondering if you got it?

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.