Viewing 1 post (of 1 total)
  • Author
  • #2596
    Ed Kraushar
    CVRS Member

    I picked up this King Model 30 on Kijiji a few months ago. The previous owner had partially stripped it so it required some veneer repair and refinishing.

    The cabinet designers failed on this one as the entire bottom with twelve screws has to be removed to take out the chassis. The chassis is so heavily shielded that parts are hard to get to without pulling it apart.

    Both audio transformers required rewinding and the movable coils were in need of adjusting their position. This King is very well built and a much heavier construction than their other early models.

    Performance is quite good.


Viewing 1 post (of 1 total)
  • You must be logged in to reply to this topic.