Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • #16893
    robert clausen
    Forum Participant

    I need a schematic for this radio. Enclosed are two pics. Tubes in this radio are 80, 42, 75, 6K7 and a 6A8. The front dial does say Serenader but there were quite a few of these from what little I know. Mine is a console model.

    Any assistance as to what model this is or a schematic would be greatly appreciated.

    #16898
    Doug Parker
    CVRS Member

    According to your metal ID tag it was manufactured by Dominion Electrohome Industries Limited which was the predecessor to Electrohome and manufactured in Kitchen, Ontario. The radio chassis number is 6525-S. The CVRS schematic service may have your schematic.

    #16899
    robert clausen
    Forum Participant

    Thanks Doug. Also, I hadn’t noticed my chassis photo was upside down as well!

    #16900
    Les Dickson
    CVRS Member

    Check out this information at the radiomuseum.org site. It’s always a good idea to check that site.
    https://www.radiomuseum.org/r/phonolacan_6525_s.html

    #16902
    robert clausen
    Forum Participant

    Thanks Les, that’s the one. I didn’t even think of Phonola. I was checking Nostalgia Air and Pacific TV for Grimes, Electrohome etc. Great advice.

Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.