Home › Forums › Show & Tell › Hard to find model RCA VICTOR Q-25 Table Radio

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 28, 2011 at 11:11 pm #2563
    mukerjea
    Forum Participant

    After searching for past 10 years I am able to find this one radio. This radio is not very great to look at. It is a 6 tube radio with 5 Band spreads made in 1940. My father had this radio and he was very proud of this radio. This model was mainly for export and this is the reason it was hard to find.
    Fortunately, I got this radio in very good working condition, everything is original including the cabinet finish. Its back cover also survived 70 years of torture. I am going to check the electrical and do the needful to make it work as new.
    Specs are:
    6 Tubes: 6SA7 6SK7 6SQ7 6AD7G 6F6G 5Y3G
    8 inch Speaker is Electro Magnetic Dynamic LS (moving-coil with field excitation coil) 3 watts
    Bands: AM + 4 SW
    Size: 18"L x 8"D x 13"H weighing around 24 lb

    Download us_rca_q25_front.jpg. (Caution: This file may not be virus scanned.)

    September 28, 2011 at 11:13 pm #2565
    mukerjea
    Forum Participant

    View of the chassis

    Download us_rca_q25_chassis.jpg. (Caution: This file may not be virus scanned.)

    September 28, 2011 at 11:14 pm #2567
    mukerjea
    Forum Participant

    Close up of the dial

    Download us_rca_q25_dial.jpg. (Caution: This file may not be virus scanned.)

    September 28, 2011 at 11:15 pm #2569
    mukerjea
    Forum Participant

    Back of the Radio is still there! 🙂

    Download us_rca_q25_back.jpg. (Caution: This file may not be virus scanned.)

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.