1) Regal Model 720 2) NE Model 5300 3) Silvertone 2

Tagged: Northern Electric 5300, Regal-720, rusted metal cabinet

This topic has 3 replies, 1 voice, and was last updated 9 years, 2 months ago by Les Dickson.

Viewing 4 posts - 1 through 4 (of 4 total)

Author

Posts
December 20, 2015 at 7:10 pm #7226
Les Dickson
CVRS Member
Hello everyone, and Merry Christmas.
1. I recently acquired a Regal Model 720. See the attached photos. I’ve searched the web and can’t find any schematics or information related to this model. Nothing could be found in the CVRS Schematics either. There is only one tube in it, looks like 6AU6 I think. I’d appreciate any info anyone might have.
2. I have a Northern Electric model 5300 – and I have a schematic for it, but don’t have anything showing the tube locations on the chassis. Again, any help would be great.
3. My Sivertone 2 has raised rust blemishes on the metal case. Any way to remove them without needing to strip/sand/paint the case?
Attachments:
December 21, 2015 at 10:55 am #7234

Rhonda
CVRS Member

For the Silvertone, would a dent removal/repair place be able to help? Apparently these shops do some pretty neat things with vehicles that have minor damage to them.

Hope that helps,

Gerry

December 22, 2015 at 9:48 am #7236

Peter Heembrock
Forum Participant

The 5300 chassis is the same as the 5200 I believe…and from left to right looking at the rear I think it is 12SA7, 12SK7 and 12SQ7. The rectifier tube can be located easily by following the AC power cord through the switch to the appropriate socket…

By the way I just went to PacificTV.ca to check for the schematic for this and the website seems to be gone…funny because I just received some used tubes from them last week in the mail.

PH

December 23, 2015 at 8:06 am #7237

Les Dickson
CVRS Member

Gerry, thanks for the automotive removal/repair idea. I hadn’t thought of that.
Peter, thanks for the tip on locating the tube layout, much appreciated.
Author

Posts