Home › Forums › Electronics Restoration › Mohawk S75 Schematic

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 30, 2011 at 4:50 pm #2357
    Keith-RL
    Forum Participant

    The schematic on page 14 from RCC manual for mohawk radios does not match with the set I have. If I am reading it correctly ( and I may Not be) they list a 6 tube set with different tube types. Any help in sorting this out and setting me straight will be appreciated. The chassis has the tube types stamped into the metal which is handy since I am missing four tubes.
    The set has been worked on before, a wire has been wrapped around two terminals on the power transformer, I assume it was to bypass a faulty on off switch.
    Lots of dogbones, wiring is a mixture of cloth covered and rubber, the rubber wire has cracked and will need replacing.

    Download radiooo 009.JPG. (Caution: This file may not be virus scanned.)

    Download Terminals.jpg. (Caution: This file may not be virus scanned.)

    Download text.jpg. (Caution: This file may not be virus scanned.)

    May 2, 2011 at 11:36 pm #2361
    Ed Kraushar
    CVRS Member

    Try looking at the Mohawk S-7 on page 7 of RCC. It has the right number and type of tubes.

    Ed.

    May 3, 2011 at 2:58 pm #2362
    Keith-RL
    Forum Participant

    Thanks, I don’t know how I missed that, I looked many times at those Mohawk pages and never noticed it, must be time for new glasses. Thanks again: Keith

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.