- This topic has 6 replies, 2 voices, and was last updated 7 years, 10 months ago by
.
-
I have a need for a dial for a Marconi model 85. or similar model. The one I need is for the tombstone pictured,
but a similar one would work.
There are several Marconi’s that used basically the same dial with a little different configuration.
The distance across the glass is 9 inches
Let me know what you have .
Thanks Dan in Calgary.Here is what I have :
Part number of the glass is 60510
The glass is 8-3/8″ w x 6-7/16″ h
From the left of the “K” on the left to the “.” after the “C” on the right is 6-1/2″
From the top of the “5” on the top of the dial to the bottom of the “9” at the bottom of the dial is 5-1/8″
From the left of the left oval hole to the right of the right oval hole (only in the black paper – glass is solid) is 3-3/8″
From centre to centre of the two round holes in the glass and black paper is 1-1/4″Let me know how this fits for you.
cheers
Attachments:
- You must be logged in to reply to this topic.