Stewart-Warner

Home › Forums › Show & Tell › Stewart-Warner

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 2, 2011 at 5:03 pm #2160
    radionut
    Forum Participant

    I have a Model 325 and need to know what tubes it takes . It has 5 sockets 1st. af. 2nd. af 1st. rf. 2nd. rf and det. It has no tubes in it. I would like to know what I need and where it goes.
    Thanks for help
    Bruce

    January 2, 2011 at 9:02 pm #2162
    Ed Kraushar
    CVRS Member

    Hi,

    Looking at the schematic I would say that it takes 01A tubes in all positions. Since it does not use a separate B+ of 22 volts for the detector then an 01A would be used there.

    Ed.

    January 2, 2011 at 10:24 pm #2163
    radionut
    Forum Participant

    Thanks Ed
    I will have to see if I can fine some. I am not in a hurry as I don’t have a power supply to run it on .

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.