I have tested all of the tubes and in fact I have tried them in my test radio which happens to be an ac/dc radio with the same tubes.I tested the voltage this morning and I have 110 volts ac on all the pins on all of the tubes. That’s from the live side of the switch to any pin on any of the tubes. Not sure if that is what it should be or not. I’m missing something here,just not sure what yet.Maybe something hooked where it shouldn’t be. I tested the transformer with a 9 volt battery and I get static in the speaker so I am assuming it is ok. I do have a dim bulb tester but there is nothing there. I am using the isolated transformer because I have been zapped more than once.I appreciate all of the comments and suggestions and the help.
