Reply To: Crosley Resistor value information needed

[Ralph Spracklin]

Hello Robert

You did not say which transformer your Radio runs on. Could be any of three Power Transformers. 110 Volt, 60 Cycle; 110 Volt, 25 Cycle; or 250 Volt.

This Schematic has done things in a different manner than most schematics. And as well their method of numbering the tubes on the schematics, is something else. Also it seems that the Heavy Black Line through the center of the schematic, represents chassis ground. I’m just thinking that different Power Transformers could be the reason for the different values on R21 and R22.. Does this Radio work since you re-capped it and replaced some of the resistors?

And also did you take a reading with your meter, on those two Resistors?? Some of those radios were made for the European Market.

Ralph