Dan Walker
CVRS Member

Ralph; [6D531] radio
I have the voltages from the transformer with the tubes removed.
The heater pins are 7 volts AC.
The secondary winding going to the plates of the 80 tube are 780 volts AC.
the AC volts going to the center tap are as follows 383 and 388.
The volts going to the heater of the 80 is 5,89 volts AC.
I hope this gives you the information you need.

My radio is a table top, not a console
Here is what it look like now , and a photo of what I hope it will look like after I am done.
I have a lot of work ahead of me, but the cabinet won’t get done until spring.
Dan in Calgary